A61L-0001-0094TX-1450ABA5 compatible LCD display 14 inch for CNC machine replace CRT monitor
A61L-0001-0094 Fanuc CRT, which wasintroduced in early 1990s, is available on the FANUC control systems 15, 15T,15M, 15-A, 15-B, and on labels, also called TX-1450ABA5, 14X59-1 orA61L-0001-0094#A, which can be directly replaced by the LCD monitor
The signal interface is HONDA MR-20M, andthe display is 14 inch color CRT display
The replacement LCD monitor specificationas follows:
1. support 15KHz to 48KHz frequency linesignal, field frequency from 48Hz to 75Hz, the positive and negative automaticadaptation, input line field automatic frequency scanning.
2. support field input for digital TTLsignals or analog signals.
3. input interface: D-sub, 15PIN, BNCinterface and other interfaces, can be customized.
4. support black and white display,monochrome display, color display, true color display.
5., support automatic recognition of thescreen, adjust the width.
6. support separation of synchronous signalHV, composite synchronization signal Cs or synchronous signal compound in thevideo G signal (Sog), polarity, positive and negative are automatically identified.
7.75-500 ohm high input impedance, suitablefor all kinds of strong and weak signal source
Technicalparameters of industrial screen:
| Type | KTV148 RGB EGA CGA MDA Screen |
| Screen size | 246*184.4mm(length*width),12.1 inches,4:3 |
| Sweep range | H-row scanning: 15Khz-48Khz Plus-n-minus auto-adaptation |
| V-row scanning: 48hz-75hz Plus-n-minus auto-adaptation |
| Input signal | Signal source types | MDA,CGA,EGA,VGA RGB,RGsB,RGBS,RGBHV signals |
| Synchronization method | HV row filed separation, HV row field mix Cs, green segregation Sog |
| TTL digital level: 2.4 ~ 5.0V or Low 0.0 ~ 0.8V Analog model level: 0.7-2.5VP-P |
| Input resistance | 75-500 O high input impedance which can adapts to various signal sources. |
| Scanning mode | Interlaced scanning/ sequential scanning |
| Signal line | 9-pin signal line (optional), 15-pin signal line, BNC input |
| Screen colors | 262K, monochromatic, black-and-white |
| Contrast | 450: 1 |
| Brightness | 400 cd/m2 (Typ.) |
| Response time | 15/30 (Typ.)(Tr/Td) (ms) |
| Working conditions | Temperature: -10 ~ +65, humidity: 20% ~ 95% |
| Storage conditions | Temperature: -30 ~ +70, humidity: 10% ~ 95% |
The Old CRT monitor A61L-0001-0094TX-1450ABA5 as follows:
2nd, Remove the old CRT displayand empty the original CRT position. See below
The new LCD directly installed, thecorresponding fixed screw holes, the signal wire is inserted, connect the powerline can be, some parameters can be obtained by OSD display menu displayoptimization, thus completing the CRT replacement for A61L-0001-0094 liquidcrystal process.
Because of we improvement all the time, theabove images may have a little difference with the actual image. We reserve theright to revise the picture. We will try to put the pictures of the latest.
Our products all adopt imported industrialLCD panel and power supplies from companies such as SHARP & AUO to ensuresthat it has a long service life, low failure rate, suitable for working conditionof continuous use of 24 hours, without daily maintenance, with exactly samemechanical size of the original hole site, and can quickly restore productionas long as to plug in the signal interface and power interface. Compared withthe original CRT monitor, LCD monitor has advantages of simple structure, lowerpower consumption, little daily breakdown, strong vibration resistance, strongelectromagnetic interference resistance, simple maintenance, light weight, andeasier to standardization, etc.
All models are of regular stock to ensurerapid delivery and some special use display can be customized.
